Let's Make Robots!

Flippy the Gap Crossing Robot

Crosses the gap

This is Flippy, he was built to win the Cross the gap challenge but I couldn't complete him in time. He is the second (and third) implementation of my third design for a gap crossing robot.

I recently changed jobs and I had to travel to the US leaving an almost working gap crossing robot at home. I had really high hopes for the new design and it really bothered me that I didn't get the chance to get it working so I decided to build it from scratch in my hotel room. I placed and order with Sparkfun and got a few basic tools from someone at work ( Thanks Jerry! ). Two days later I got this:

Sparkfun Parts Box

The parts list consists of:

Arduino Uno x1

9 Volt Alkaline Battery x1

9V Battery Holder x1

Servo - Medium x4

Battery Holder - 4xAA Square x1

SPDT Slide Switch x1

ProtoBoard - Square 1"Single Sided x1

Break Away Headers - Long x2

Jumper Wire - 0.1", 3-pin, 12" x2

 

A few hours later I had soldered togather a "mini shield" board to distribute power to the servos. The board has a switch for the main power supply and a beefy capacitor to help with current spikes. Its main purpose is to neatly connect the servos to the arduino and the battery.

Servo power distribution board

Complete Electronics

 

After a few more hours hacking and gluing the cardboard box that the parts came in, I had this:

Flippy

Flippy from another angle

Flippy strikes a pose

 

Unfortunately, although cardboard is a very nice robot building material it is not very strong. On the first test, one of the legs broke off:

Flippy breaks a leg

 

I abandoned the project for a few days, but then I found 3mm expanded PVC foam in an art supply store, so I remade the entire chassis. The PVC foam board is a really nice material. It is very easy to cut and work with. Even so, it took me a few good hours to remake it. Here is the final product:

Flippy, remade

brand new chassis

As you will see from watching the videos, it took a bit of experimentation to get to this point.

 

PS. I was planning on posting this over a month ago but life got in the way.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

I admire your dedication: redoing everything in a hotel room! Fantastic.

I like your design for the shield board to distribute power to the servos. Can you share the specs and or schematic? I would like to build one to try it out.

Thanks! Great work!

Andrés