Let's Make Robots!

Log in to get help, show off, share and inspire:

wrench_orange.png Your work in progress or a finished robot: Robot project
script_edit.png Write in your own blog: Blog entry
comments.png Discussions and questions: Forum topic
brick.png Show what you are making robots of: Component
lightbulb.png Help others with what you have learned: Tip or walk through
link.png Add a good web shop, a guide or a cool link: Web link
Measures my Heart activity on a FPGA chip
At Last I have been able to experiment with my  terasic Deo_Nano FPGA Development Board. It uses an Altera Cyclone IV, EP4CE22F17C6N, FPGA chip. My example above … Read more
creep around, avoid obstacles, autonomous and remote controlled
So this is my first robot ever.  Why another chopstick robot? Well, simple answer: When i first started to look into making any kind of robot the price for a kit … Read more
Meet Elf - one of my RoboPi + Raspberry Pi based robots! I have a lot of the Magician 2WD chassis, and I thought it would be the perfect platform to evaluate … Read more
Hello Everyone, I have been working on this one motor walker the last month on an off. It was inspired by Jerome Demers' single motor walker, but with a few … Read more
Alright so this is my first robot that can actually do something other than moving forward that doesn't require an arduino. all you pretty much need is : 2 555 … Read more
Control every robot with a customizable app
I just finished a project I have been working on for quite a while now - a fully featured universal Bluetooth remote for Android. Most controllers I have seen on … Read more
Should be able to roam around my house, respond to loud sounds with a ear perk, answer questions like "What's the temperature?", augment home security, deliver voice messages, be an awesome robot and win me some prize money from somewhere.
I've been wanting to make a robot dog ever since I saw Blue Falcon and Dynomutt and Dr. Who's K9 in the 70's.  And I've also always wanted a robot that I can talk … Read more
UPDATE: August 10th, 2014 I printed a body and added BLE.  I'll explain tomorrow after I get some rest, but the BLE was to allow me to test directed locomotion. … Read more
This one was on the pipeline for a long time and I've been building it for some time now. It´s my small tribute to Oddbot's Polimorph Caterpillar. Loved the … Read more
Serves Salt when you need it. Hangs over the table, waits for sound (voice command, soon) and hands me the salt cellar
Float, sail, tow, look small in the middle of a pond, harrass submarines
Hi. This is my first project post (but not my first project), so sorry if I've done anything wrong. I'm not sure if I'm OK to post this, as it is an RC model, but … Read more
                MDi #3 means Mech-Dickel interactive number 3. Well, it's not going to be something so interactive like Jarvis, but I hope I'll have much … Read more
...then I can have Nosy! A very brief introduction, if I may. I have been designing and building robots and robot control systems professionally for more years than … Read more
     This project is an attempt to make a low scale humanoid biped utilizing as controller an Arduino UNO and nothing more. The actuators will be 12x servo motor … Read more
One thing most robots need is the ability to control motors. This circuit will work from 7.2V to 15V with PWM frequencies up to 25KHz and drive motors with a stall … Read more

Note: You can follow some projects some of the time, but you cannot follow all the projects all the time.




Recently collected


First Robot Build. Vinny was salvaged from an RC car truck that I bought from the Goodwill for $1.99. Read more

Robot Class

I am in the process of submitting a course proposal for an adult evening education program that would introduce people to robotics. One of the entries that I must fill in deals with expected material costs. I would appreciate feedback on what would be appropiate expenses and whether the school should include the costs as part of the registration or if the student should buy the components as needed. I am in favor of having an option not to build.

On a similar note, would it be better to first offer a course in "C" programming geared to a possible robotics controller board?

Extra Hardware Needed for Larger Hexapod

About a month ago I purchased hexapod kit off ebay.

Aluminium-Hexapod-Spider-Six-3DOF-Legs-Robot-Frame-Kit-for-Arduino

Yesterday as a break from program my Mini Hexapod, I started putting together this larger one.

I thought it was time to tell a little about the application I'm working on these days. Though very far from finished, it's starting to look like something bit by … Read more