Let's Make Robots!

Log in to get help, show off, share and inspire:

wrench_orange.png Your work in progress or a finished robot: Robot project
script_edit.png Write in your own blog: Blog entry
comments.png Discussions and questions: Forum topic
brick.png Show what you are making robots of: Component
lightbulb.png Help others with what you have learned: Tip or walk through
link.png Add a good web shop, a guide or a cool link: Web link
LM4755 amp it is a fun project i always like to build audio projects, i repair amplifiers.   chips: power amp chip(LM4755) preamp chip(LM4562) EQ 3 band(LM4562) … Read more
As some of you know, my work is more and more related to SMD design. I just love how compact and robust these designs can be. I have no problems soldering the … Read more
Interfaces Arduino and Bluetooth 4.0 Module
UPDATE: 7/6/14 -- Silkscreen corrections.UPDATE: 6/1/14 BOM CorrectionsUPDATE: 4/2/14 -- Corrected information and linked the new breakout board, v.9.9   Read more
Serves chilled wine among other things
Using a
  *New Update* If you are interested in my other robots/projects please visit my personal webpage at www.secondrobotics.com   *Older Update* Read more
After making a wired RC car i thought of making a wireless RC car and made this RC car using NRF24L01 modules.After seeing Bajdi work on this modules i tried to … Read more
Autonimous surveillance of my backyard, eventually.
Harvey is a Wild Thumper based surveillance robot intended to operate outside. Future plans are to be able to patrol my backyard with wireless video transmitted … Read more
Changes resistance when compressed
You may remember an article I wrote with regards to this Conductive Ink Indigogo campaign It has arrived and I am well pleased with the quality and uses it can be … Read more
Sits on your desk and looks cool.
I made this a while ago and I thought I might as well post a page for it. I printed this on a Printrbot Simple 2014. V1 printed successfully for me, but I … Read more
Greets people, recognizes faces, tracks moving objects and follows them (hopefully)
I will be taking a bit of a break from the APM rover to start a new project that's a bit more challenging. I got this idea from a game in the fallout series (New … Read more
AuMac A multitask robot for children and security surveillance   Read more
Produces a variety of colors from an RGB LED using PWM
A simple RGB LED demonstration. First Part : Various Colors on Display (Mixing of RGB colors to produce other colors using PWM) Second Part : Fading Action using … Read more

Note: You can follow some projects some of the time, but you cannot follow all the projects all the time.




Recently collected


This tutorial is still under contruction so please check weekly for updates. I have taken it out of "Draft Mode" because it has a lot of useful information for … Read more

Flash Memory of Arduino Uno

 

Sketch uses 13,308 bytes (41%) of program storage space. Maximum is 32,256 bytes.

Global variables use 2,082 bytes (101%) of dynamic memory, leaving -34 bytes for local variables. Maximum is 2,048 bytes.

processing.app.debug.RunnerException: Not enough memory; see http://www.arduino.cc/en/Guide/Troubleshooting#size for tips on reducing your footprint.

Inspired by RodriBot, by Luismi, I decided to make my own biped. I used the four servos that didn't fry in Kubik (the ones I had there before replacing with bigger … Read more

Looking for a custom built inspection robot

Hello to all the community,

I'm looking for a micro TIR (tactical inspection robot) either tracked or wheeled but tall about 1,7 cm , wifi controlled by pc or android tablet and with cctv camera.

Spinning line follower or maze solver
I've now attached a 3D model in Sketchup. Scamper started as an experimental omni wheel platform. The challenge with omni or mecanum wheels is that you need precise … Read more
Roams, seeks/avoids light, line following, hokey pokey, acts silly
Using a
Lil·li·pu·tian Read more
Look maaa', no tools! :D Well, that's not entirely true, but it isn't far off. I have constructed this robot with a minimum of tools (and materials) , for the … Read more
Remote-controlled from a computer.
  I decided to work on something smaller, using all the experience I gained with Kubik. This one is as small as I could make it, uses an Arduino Pro Micro for the … Read more