Let's Make Robots!

BASIC STAMP

Eight Lights with two pins Clock and Data
I was working on my Picaxe 28x2 robot from http://letsmakerobots.com/ and I wanted lights and I needed more sensors. I had four input pins left. With the 28x2 you … Read more
It uses a Parallax Basic Stamp and four servo motors. It will use a SOMO 14-D to read the recipes aloud. The buttons are going to be used to control the reading of … Read more
Operates by voice command
Using a
This is my first Robot ARM controlled by Basic Stamp 2 microcontroller with voice recognition "Say It Module". I used 5 Servo motors 3 large and 2 medium. Say It … Read more
Read RFID tags and Smart Cards with this handheld device
A Basic Stamp 2px powered handheld device that can read RFID tags and Smart Cards then displays the data on an LCD screen. Future upgrades will include the ability … Read more

Is the POP-BOT arduino microchip compatible with the BOE-BOT developer board?

I have an Inex POP-BOT which came with an arduino-like microchip, and was thinking of getting a BOE-BOT, which uses a Board of Education with a BASIC stamp microchip attached to it. Now my question is, there two chips seem to look identical in size, and can both be detached from their respective developer boards, so what I'm wondering is, would they be interchangeable?

Autonomous roaming using a variety of gaits
Using a
This critter has been with me for some time. Built around a (discontinued) Crustcrawler quadwalking kit, UGLY is now an autonomous 2dof, 4 legged roamer using a … Read more
Autonomous Roaming using 3 holonomic wheels
Using a
As promised, I added one more vid of omniBOT (aka Jon Tyler) to this listing.  J.T. is an autonomous roamer with three servos attached to holonomic wheels. Code … Read more

Parallax Board of Education board + extras

This is a collection of items to make up a complete Parallax Board of Education training kit. The Basic stamp is a new BS2P processor which is faster, more memory and comands then the original Basic Stamp2. It retails for $79.99. The board is in mint condition (only used a few times) and tested before listing. Everything else is new except the USB cable I used with my camera a few times. Parallax retail value of over $190, not counting the cable and un-opened bag of electronic parts that go with the book.

BASIC Stamp 1 help?

OK, plain and simple...

I need a 100% complete tutorial on how to set up a basic stamp 1 (I know the BS-I is horrible).

 

Literally everything.  All I can find are BS2 tutorials.

 

Thanks so much