Let's Make Robots!

PICAXE 08M

Setting up an interrupt properly

For school this year we are making picaxe 08m robots and have a sheet of funtions we need to fill out. This one is attempting to seek shade It needs more work but right now i just need help with the interrupt code,  I have this code here

symbol light = pin3
symbol movment = w0
setint %00100000,%00100000

top:
if light = 0 then low 1
if light = 0 then gosub find
endif
if light = 1 then high 1 low 2 low 4
endif
goto top

Avoid Obstacles, Search for charging station when battery is low.
Using a
This robot normally goes around avoiding obstacles and (sometimes) edges until its batter drops low. Then the robot goes towards a 38khz pulse instead of away from … Read more
I think, it is one of the cheapest 3-axis robotic arms. It can move, kick and mainly draw in many ways. It is controlled throught PC, which sends command via serial … Read more

Automated Light Switch - Laziness Prevails!

The Video explains all.

This is my automated light switch, built in a little under 2 hours. Just one application that a servo can be used for.

The servo is just mounted on some hastily cut masonite, the triangular brackets are just glued to the main board with PVA, and everything else is held together with double sided foam tape.

 

DSCF0832.jpg

 

 DSCF0834.jpg