Let's Make Robots!

unio

UNIO memory breakout board

A few weeks back I aquired some memory chips(samples rock). These are the special unio memory chips, essentually 1 wire for both input and output. As this is an 8 pin chip with only 3 of the pins being useful, I decided to try to make a simple breakout board with some small 5x5 hole pcb boards I grabbed from SF. These unio chips can be used with the20x2, 28x2 and 40x2 and the three pins are vcc, vss and I/O. The chip id is 11aa040(4k memory)

As recommended, I've added a small pullup resistor to the board. This is the results of...

SF order on it's way[shipped!]

Since it's been a while since anyone has posted on this forum, just thought I'd post something.

Finally put my order in thats been in the cart on that fateful freeday. added a couple extra things to it as well since I have a mini project going.

Opted to get the polulu trex motor driver as well since my hbridge attempt has yet to work(though I haven't tried to trouble shoot it for a while) .

Got a couple of 20x2's to see what they are like and since they had some sweet hw access. Grabbed a couple of atmel 2313's since they have built in uarts.