Let's Make Robots!

none yet

As I discovered "Bob" I had purple filament in my office 3D printer. Well, i thought it would not make it to the robot section since I am not having enough time to … Read more
Introduction This Rover 5 platform was received with damaged wheels so I decided I'd give mechanum wheels a try. Unfortunately the cheapest set of mechanum wheels I … Read more
stEve started life as a robot shaped sweetie tin. I received him as part of a Christmas present last year (2011) from some friends. This Christmas Eve stEve was … Read more
Hi guys! I know I've been super inactive lately, but I finally created another robot project to share with the world. My other projects I've been doing in the … Read more
Walks around, soon avoids objects
Using a
Inspired by some other 4 servo bipeds on LMR I decided to make my own. I had to name it Bonnie, because my other walking robot was named Clyde. Bonnie was just … Read more
Navigate around via remote control
Using a
Hello to all and thank you for looking at my ongoing project. This is my first LMR project, inspired by all the fine examples on this website. So far I have built … Read more
Update: using parts in another robot! this is my first robot. very simple. sings "jingle bells" and dances.   code Read more
nothing yet, soon it might walk
Using a
A.P.O.S.T.O.L. is short for Armoured Prototype Of Systematic Takeover Of Land. It doesn't make much sense, but when me and my robotics group were thinking of a name … Read more
Holomonic Movement Kiwi Steering 2DOF
Using a
Hi to all, this is an Arduino based three omni wheels rover with 2DOF. The 2DOF is accomplished by three omni wheels on a continuous rotation servo (modified) each … Read more
Navigates arround controlled by other computer
Using a
Hi, This is my newest project. It is basically formed by two 28x1that are serial controlled by a processing application, one for the motors and other for the two … Read more
This project is my very first robot project. It has a cybot foot base with 2 DC-motors and 1 wheel in front. I use an Arduino processor as his "brain". For now my … Read more
Wanders around and grabs your stuff
Using a
Update 2011-10-06: Melty, melty Poor GRAB-E. His foolish creator left him in the garage for a few days after taking him home from a trip. The hot summer sun melted … Read more
Cuts shapes with better precision then me :D
Using a
Pictures:  - the front   - the back - left - right - the power unit Read more
Anything I tell it to
Using a
This is my first attempt at an RF controlled robot.  So far, the most I've done is stripped the chassis of an old RC car, and I've started on the control panel.  … Read more
(8/25/08) Material are being gathered for my Yellow Drum Machine morph. I plan on making this with my 7 and 4 year old sons. Therefore the drumbot will need … Read more
Goal:  Make a robot that draws and takes some of the same commands as KTurtle.  Eventually this robot will draw using a marker through the hole of the CD.  I … Read more