Let's Make Robots!

All LMR robots, sorted by recent activity - Submit your own robots - See most collected robots here


Meet Sparky (Assistive Companion) currently sparky has the ability to find his way around objects and navigate through rooms. Every move that sparky makes is saved … Read more
Look maaa', no tools! :D Well, that's not entirely true, but it isn't far off. I have constructed this robot with a minimum of tools (and materials) , for the … Read more
Hi!! I made  telepresence robot. Device was mounted on the robot:LIVA(small windows PC),Arduino Development language:Processing Read more
Carry Tools and Laptop to free human hands.
Using a
  COMPLETED: 2011.12.08 This is my first robot built from scratch and I am new to robotics. I haven't played with electronics for over 25 years and I have a … Read more
As seen in my blog post about Sticky, first attempt to build a quadrupod ended with a jump from the desk. Hopefully, I learned a lot and I was ready to launch the … Read more
Light seeking without microcontroller
Snuffy the light seeker made by Žygimantas Pusvaškis Lithuania   1. Read more
...then I can have Nosy! A very brief introduction, if I may. I have been designing and building robots and robot control systems professionally for more years than … Read more
Hello,  After buying an Arduino starter kit and playing a little bit with it I found out that it's possible to create robots with it. Doing some research on … Read more

RG2

New Video 8-24-14      RG2 combines several ideas i have been thinking about for a few years.      With one CR Servo it can go forward or turn left or right. … Read more
ENG This is my first robot. I am completing the College of Information Systems and my TCC will be one based on the Open Source Arduino robot technology, but even … Read more
Creep, trip over its own legs
This is my attempt at a four-legged crawler. Right now it just has two servos per leg, and pretty random ones at that. I plan to replace them and add a knee to each … Read more
Inspired by RodriBot, by Luismi, I decided to make my own biped. I used the four servos that didn't fry in Kubik (the ones I had there before replacing with bigger … Read more
Ok, so I have wanted to build a robot for a while, but school prevented me from starting anything.  At the beginning of this summer I bought a Raspberry Pi to just … Read more
Spinning line follower or maze solver
I've now attached a 3D model in Sketchup. Scamper started as an experimental omni wheel platform. The challenge with omni or mecanum wheels is that you need precise … Read more
Hey guys, I have finally gathered up enough salvage parts and such to finally make a half way decent robot. This is the first custom robot, meaning that all the … Read more
[Update: Chapter PROGRAMMING - Chat bot mode] Introduction x2 is a small humanoid robot platform for my current research. The specifications are as following: Read more
Recently my company has been asked to demonstrate a robot that can perform an enviromentally friendly task. I only have about 1 month to complete the robot and I'm … Read more
autonomous, web controlled.
Hello everyone! I've been learning as much as I can, but now I am starting to build. And with info / help from this site I hope to make some awesome robots :) the … Read more
creep around, avoid obstacles, autonomous and remote controlled
So this is my first robot ever.  Why another chopstick robot? Well, simple answer: When i first started to look into making any kind of robot the price for a kit … Read more
Telepresence. Human/Computer interaction (speech, movement). Autonomous mode using A* in a controlled environment.
Using a
Update 08/18/2014 Finally figured out how to get the Dynamixel servos to be controlled by the XBox controller through my Java program.  Using a USB2Dynamixel … Read more
Latest Blog Entry (19 Aug 2014):  Phase 9 - Web Control (Serial Preview/Wannabe Web Control) Notice: Currently WIP on Phase 6 & awaiting parts. See project … Read more
Alright so this is my first robot that can actually do something other than moving forward that doesn't require an arduino. all you pretty much need is : 2 555 … Read more
                MDi #3 means Mech-Dickel interactive number 3. Well, it's not going to be something so interactive like Jarvis, but I hope I'll have much … Read more
After a long hiatus, I decided to resume working on this project. I bought a USB power supply, that easily powers the Pi with the camera module and wifi dongle … Read more
This one was on the pipeline for a long time and I've been building it for some time now. It´s my small tribute to Oddbot's Polimorph Caterpillar. Loved the … Read more
Everything related to this one is hosted on Github links below. LINKS to … Read more
Hello Everyone, I have been working on this one motor walker the last month on an off. It was inspired by Jerome Demers' single motor walker, but with a few … Read more